Wednesday, June 19, 2013

350-001 Question 9

350-001 Question 9
On your Terminal Server you are seeing spurious signals on line 6 of an asynchronous port due to contention issues. What command will fix this issue?

350-001
 
A. flowcontrol hardware
B. transport input none
C. no exec
D. exec-timeout 0 0
 
Answer: C
 
Explanation:
The "no exec" command is an optional command for reverse telnet configurations. Adding this line lessons the likelihood of contention over the asynchronous port. An executive process exists on all lines and buffer data to each other. At times, it can make it difficult to use a reverse telnet session. The command "no exec" will fix this.

350-001 Question 8

350-001 Question 8

Which of the following statement is true regarding clocking for a Cisco T1 interface?

A. The clock source command selects a source for the interface to clock received data.By default, it is clock source loop-timed (specifies that the T1/E1 interface takes the clock from the Tx (line) and uses it for Rx).
B. Routers are DTEs and NEVER supply clocking to T1/E1 line.
C. The clock source command specifies the location of the NTP server for timing.
D. The clock source selects a source for the interface to clock outgoing data.
The default is clock source line -Specifies that the T1/E1 link uses the recovered clock from the line.
E. The clock source identifies the stratum level associated with the router T1/E1. The default is Stratum1.

Answer: D

Explanation:
Clocking can either be internal, looped, or line. The default is line, meaning that the router is receiving clocking from the carrier network line.

Incorrect Answer:
C, E. These answers relate to NTP services, which are used for providing time stamping information to the router and does not relate to clocking. Stratum levels provide a hierarchy to the NTP source, with the highest level as 1.

350-001 Question 3

350-001 Question 2

From the "show version" command you see that that the system file image is c2500- jsl_121-7.bin. What IOS feature set is loaded on this router?

A. Enterprise
B. IP
C. IP/IPX/AT/DEC
D. Enterprise Plus
E. IP Plus IPSec 3DES

Answer: D

Explanation:

The system image file name in the exhibit is c2500-js-l_121-12.bin The table below shows the possible options IOS feature file name IP Plus c2500-is-l.121-7.bin IP c2500-i-l.121-7.bin Enterprise Plus IPSEC 56 c2500- jk8s -l.121-7.bin Enterprise Plus c2500-js-l.121-7.bin Enterprise c2500-j-l.121-7.bin